How to Complete Grid Infrastructure Configuration Assistant(Plug-in) if OUI is not Available (Doc ID 1360798.1)

0    362    1

👉 本文共约1515个字,系统预计阅读时间或需6分钟。

APPLIES TO:

Oracle Database Cloud Exadata Service - Version N/A and later
Oracle Database Cloud Service - Version N/A and later
Oracle Database - Enterprise Edition - Version 11.2.0.1 and later
Oracle Database Cloud Schema Service - Version N/A and later
Oracle Database Exadata Express Cloud Service - Version N/A and later
Information in this document applies to any platform.

PURPOSE

This note provides instructions to complete 11gR2/12c Grid Infrastructure configuration assistant(Plug-in) if Oracle Universal Installer session is not available anymore. OUI session can be gone for a number of reasons, i.e. node rebooted, session timed out due to security setting etc.

The note can only be executed after 11.2/12c Grid Infrastructure root script (root.sh or rootupgrade.sh) is finished successfully on all nodes.

SCOPE

This document is intended for Oracle Clusterware/Oracle RAC Database Administrators and Oracle support engineers.

DETAILS

A. Pre-12.2

  1. Verify whether "$GRID_HOME/cfgtoollogs/configToolAllCommands" exists or not, if not, as grid user, create a script file named configToolAllCommands with the following contents, for example:

/ocw/b202/oui/bin/runConfig.sh ORACLE_HOME=/ocw/b202 MODE=perform ACTION=configure RERUN=true $*

Note: in this example new GRID home is /ocw/b202; when creating, replace /ocw/b202 with the real new GRID_HOME path in your environment
If any configuration assistant(Plug-in) finished successfully previously and you'd like to skip it, set RERUN to false before executes it.

  1. configToolAllCommands script would require a response file cfgrsp.properties if the configuration involves installing ASM(new installation), or upgrading ASM from a release earlier than 11.2.0.1.0.

The content of the file should be as follows:
(1) If installing ASM: (assuming that the ASMPASSWORD and ASMMONITORPASSWORD will be set to oracle)

本人提供Oracle、MySQL、PG等数据库的培训和考证业务,私聊QQ646634621或微信db_bao,谢谢!

oracle.assistants.asm|S_ASMPASSWORD=oracle
oracle.assistants.asm|S_ASMMONITORPASSWORD=oracle

(2) If upgrading ASM from a release earlier than 11.2.0.1.0:(assuming that the ASMMONITORPASSWORD will be set to oracle)

oracle.assistants.asm|S_ASMPASSWORD= ==>>>>leave blank
oracle.assistants.asm|S_ASMMONITORPASSWORD=oracle

  1. Execute configToolAllCommands as grid user on first node:

If a response file was created in Step 2, execute configToolAllCommands as follows:

$GRID_HOME/cfgtoollogs/configToolAllCommands RESPONSE_FILE=/cfgtoollogs/cfgrsp.properties

Otherwise, execute:

$GRID_HOME/cfgtoollogs/configToolAllCommands

The logfile will be $GRID_HOME/cfgtoollogs/oui/configActions{TIMESTAMP}.log, it should be reviewed to find out whether there's any failures.

If on Windows platform, the syntax will be slightly different, i.e.:

\oui\bin\runconfig.bat ORACLE_HOME= ACTION=configure MODE=perform RERUN=true $*

#### B. 12.2

For 12.2, use the following:

gridSetup.sh -executeConfigTools -responseFile

For details, refer to:

[A.7.1 Using the Installation Response File for Postinstallation Configuration](http://docs.oracle.com/database/122/CWLIN/using-the-installation-response-file-for-postinstallation-configuration.htm)

#### C. 18c

For 18c, use the following:

gridSetup.sh -executeConfigTools -responseFile

(Use the response file created during installation to also complete postinstallation configuration)

For details, refer to:

[Using the Installation Response File for Postinstallation Configuration](https://docs.oracle.com/en/database/oracle/oracle-database/18/cwlin/using-the-installation-response-file-for-postinstallation-configuration.html#GUID-25DFB0D0-FC1A-432B-919C-6FB9B7F9E447)

#### D. 19c

For 19c, use the following:

gridSetup.sh -executeConfigTools -responseFile

(Use the response file created during installation to also complete postinstallation configuration)

For details, refer to:

[Using the Installation Response File for Postinstallation Configuration](https://docs.oracle.com/en/database/oracle/oracle-database/19/rilin/using-the-installation-response-file-for-postinstallation-configuration.html#GUID-25DFB0D0-FC1A-432B-919C-6FB9B7F9E447)

### Community Discussions

Still have questions? Use the communities window below to search for similar discussions or start a new discussion on this subject.

Note: Window is the **LIVE** community not a screenshot.

Click [here](https://community.oracle.com/community/support/oracle_database/database_-_rac_scalability) to open in main browser window.

## REFERENCES

[NOTE:969254.1](https://support.oracle.com/epmos/faces/DocumentDisplay?parent=DOCUMENT&sourceId=1360798.1&id=969254.1) - How to Proceed from Failed Upgrade to 11gR2 Grid Infrastructure on Linux/Unix
[NOTE:1354258.1](https://support.oracle.com/epmos/faces/DocumentDisplay?parent=DOCUMENT&sourceId=1360798.1&id=1354258.1) - How to Configure or Re-configure Grid Infrastructure With config.sh/config.bat
[BUG:16749410](https://support.oracle.com/epmos/faces/BugDisplay?parent=DOCUMENT&sourceId=1360798.1&id=16749410) - RUNCONFIG.SH FAILS WHEN UPGRADING ASM FROM 11.1 TO 11.2

[NOTE:942166.1](https://support.oracle.com/epmos/faces/DocumentDisplay?parent=DOCUMENT&sourceId=1360798.1&id=942166.1) - How to Proceed from Failed 11gR2 Grid Infrastructure (CRS) Installation

    头像

    小麦苗

    学习或考证,均可联系麦老师,请加微信db_bao或QQ646634621

    您可能还喜欢...

    发表评论

    您的电子邮箱地址不会被公开。

    15 − 8 =

     

    嘿,我是小麦,需要帮助随时找我哦
    • 18509239930
    • 个人微信

    • 麦老师QQ聊天
    • 个人邮箱
    • 点击加入QQ群
    • 个人微店

    • 回到顶部
    返回顶部